Lead Instrument CSU Engineer

Where you fit in

The SK318 Development Project involves developing the Rosmari and Marjoram gas field located at SK318 PSC Block at Sarawak Water. This includes the design, construction and commissioning of a multi-billion USD sour gas facility to deliver gas to existing Malaysia LNG gas complex. The project has completed the competitive FEED, Detailed Design phase and is currently entering to the Fabrication stage for the EPC (RMP) and EPCC (OGP) contractors. The selected concepts at DG 3 includes two (2) subsea wells and 2 dry tree wells tie back to RMP topside. Gas will be exported to an onshore gas plant (OGP) for sour gas treatment prior to exporting to gas and condensate customers at Bintulu hub.

What’s the role?

To support the project’s Lead Commissioning Engineer (LCE) in managing the PACO discipline CSU team within OGP project to execute the pre-commissioning, commissioning activities and initial startup/performance testing of new constructed facilities for the Onshore Gas Plant (OGP), the task including HSSE leadership, interface management and coordinate all handover of all Instrumentation commissioned systems to Completion team for final compilation before handover to Sarawak Operations/Maintenance team as per the agreed Acceptance Criteria.

Principal Accountabilities:

• He/she is to provide leadership and guidance to the CSU PACO discipline commissioning site team and implement the safety standards.
• To lead the CSU PACO discipline in commissioning the MAC, PCS, SIS and FGS systems ensuring the logic, safety shut down matrix, Alarm Management are properly configured and tested as per design intent and operating requirements.
• To ensure all fields instrumentation and control/protection system(S) are tested as per SAT, ITR B and CTP requirements.
• To Ensure all the production fiscal Metering and Analyzers are commissioning, witness and verify properly with industry regulatory requirements.
• To ensure all the vessels and tanks Level transmitters are calibrated properly and witness by CSU engineers.
• To Ensure all the OGP plant PVRV, PSRV are properly re-calibrated at site with proper calibration Tag (date of calibration) attached to the devices and calibration certification are made available under all the PSRV consolidated list.
• To ensure all the Safety Critical Equipment (SCE) and its performance standard (PS) testing requirements are captured properly in ITR-B and CTP.
• To support the LCE in ensuring all the instrumentation systems CSU spare part are capture in the integrated CSU spare part list and the list shall be always up to date on the quantity availability.
• To Lead the PACO CSU team on ensuring their responsibility on their systems’ ownership are well managed, under control and testing progress are on path and align to the dynamic CSU schedule plan.
• To ensure the Outside Battery Limit (OSBL) instrument scopes at MLNG/BAGSF and etc. are well covered, pre-commissioning properly and properly preserve at site.
• To stand in as acting LCE if required.
• To supervise instrumentation related punchlists/outstanding works with plan/priority in place and technically sign off and close-out of punch list items.
• To ensure all the Instrumentation related “Red Line” marked-up during commissioning are captured and submitted for engineering final “As Built”.
• Co-ordinate on site day to day and establish good communication on PACO team commissioning activities, outstanding issues with Construction team, Operations and among the other Commissioning disciplines team and ensure safety procedures and standards are followed.
• To represent Project team for Equipment Factory Acceptance Test (FAT) in vendor premises.
• To ensure that upon project completion, the as-built drawings are updated correctly, and the relevant discipline parties have copies of reports/vendors data/procedures/as-built information.
• To take part in the HAZID/HAZOP/PDMS/SUOP/CSU what is Scenario studies and workshops.
• To attend SIMOPS & Safety interface/coordination meeting with EPCC Contractor, Operations/Maintenance to ensure good regular communications are maintained between site , control room, emergency response and site office.
• To support LCE in preparation for Start-up on Paper (SUOP) and CSU What If Scenario Workshop.
  
  

Qualifications:

• Possess Bachelor's Degree in Electrical, Electronics, Mechatronics, Process, Electronic & Communication, or an equivalent field, with substantial hands-on experience in Oil & Gas facilities and expertise in instrumentation and control systems.
• Practitioner of CSU Project Standard and Guide (PS14/PG14b) Construct and Pre-commissioning Facilities Procedure & Commission and Facilities Handover Procedures and knowledge of CSU requirement in ORP different stages. This include the latest new requirements on Commissioning and Start up (CSU) and Handover Practitioner Guide Recommended Practice (SR.19.01046) guide.
• Post a TUV Functional Safety Engineer qualification is an added advantage.
• Experience and ability in using the Completion Management system (CMS) is an added advantage where the Completion Management System (CMS) for construction/pre-commissioning/Commissioning/handover is an important driver in OGP project during execution phase towards project completion.
• Post experience and good knowledge in offshore or onshore CSU execution capability on (Dry/WET ESD Test, Instrumentation Preservation work, PTW, FAT, SAT, etc.)
• Must have hands-on-the-job working experience in instrumentation, control system, protection system, Fire water system, analyzers, and metering system commissioning and validation.
• Shall be familiar with instrumentation in PCS, SIS, FGS, loop check, shut-down matrix check, prepare testing check sheet or ITR.
• Capable on developing the commissioning test plan & procedures and overall process system for wellhead, compression module, onshore oil and gas related plant.
• Have demonstrated through career of experience in strong leadership, problem resolution, ability to manage relationships of multi-disciplines and operation team.
• Able to work and interpret on PEFS, UEFS, instrument block diagram drawings and different disciplines GA drawings.